Welcome to your Rules and Ethics
What is usually the last step in the process of performing a project?
Under the exception proviso stipulated in the particular Section 18, Article III of RA No. 9292 those who have been registered and licensed as Electronics and Communications Engineer under Republic Act No.5734 for at least years upon the effectivity of RA No. 9292 are qualified to register as PECE.
A series of closets connected by slots or short conduit sleeves between floors or open shaft of the building
A person or entity intending to register as VoIP service provider is required to post a performance bond of
Part of the housing system in the ECE code that is a circular opening through the floor structure to allow the passage of a cable or wire.
There are __________ Articles and __________ sections in the RA 9292
Refers to a statement or an oath, often religious in nature, agreed by an individual in ceremonies.
This is referred to as a linkage by wire, radio, satellite, or other means, of two or more telecommunications carrier or operators with one another for the purpose of allowing or enabling the subscriber of one carrier or operator to access or reach the subscribers of other carriers or operators.
A civil wrong committed by one person causing damage to another person of his property
The compensation and allowances of the Board is comparable to that being received by the Chairman and members of existing regulatory boards under the Commission as provided for in the __________.
In the process of performing a project, after the need for a product or service is identified, what is usually the next step?
In the management tool, SMEAC, where A stands for administration, which question is appropriate for the to manager ask?
One shall be allowed to take one removal examination on the subject/s where he/she has failed to obtain the passing rating. Provided, however, that a candidate who obtains a passing rating in the majority of the subjects but obtains a rating in the other subject/s.
One of the mnemonic management tool used is the SMEAC. What does the acronym SMEAC stands for?
To register for Electronics Technicians (ECT), he/she must have rendered at least years (inclusive or aggregate) of active self-practice and/ or employment either in the Government or private sector.
Another term for “punitive damages”.
In cable facilities for a building communications service, this is referred to as the physical cable within a building or series of buildings which may include both main cable pairs and house cable pairs but not station wiring cable.
A canon is defined as:
What is the Date of approval of RA 9292
Leave a Reply
You must be logged in to post a comment.